Installation and Connection Instructions
Water drain
Drain hose
1 The drain hose must not be kinked, crushed or entangled.
•Connecting the drain hose:
–Maximum permitted height: 1 metre.
–Minimum required height 30 cm above the lower edge of the machine.
Extension hoses
• Extension hoses are available from your dealer or customer service. The internal diameter of the exten- sion hoses must be 19 mm to ensure that the function of the appliance is not impeded.
• Extension hoses may be laid a max-
imum of 3 metres horizontally; the 
maximum permitted height for the 
connection for the drain hose is
then 85 cm.
Sink outlet connection
•The outlet of the drain hose (ø 19 mm) fits all commonly available sink outlet spigot types. The outer diameter of the spigot connection must be at least 15 mm.
•The drain hose must be fixed to the sink outlet connection using the hose clamp supplied.
Water drain into wash basins (only possible with
In the case that you wish to hang the drain hose in a wash basin, use a detachable hose elbow. You can obtain this from AEG customer service under spare part number ET 646 069 190.
0 1. Fit the elbow to the drain hose.
2.Secure the drain hose against sliding off the edge of the wash basin. Pass a piece of cord through the hose elbow and fix it to the wall or the tap.
40
