AEG 80800 there are problems with the operation of the dish- washer, The dishes are still dirty

Operating Instructions

...there are problems with the operation of the dish- washer.

Malfunction	Possible Cause		Remedy
	The door of the dishwasher is	Shut the door.
	not closed properly.
	Mains plug is not plugged in.	Insert mains plug.
	House fuse in defective.	Replace fuse.
The programme does		Where dishes are to be
not start.
		washed immediately, for
	In the case of dishwasher
		appliances
	models with start delay
		-	with multidisplay, set the
	timer:
			delay start to 0.
	A start delay is selected.
		-	without multidisplay, can-
			cel the delay start timer.
	The washing compartment is	Only wash cutlery and dishes
	made of corrosion-resistant	that are suitable for dish-
	stainless steel. Rust spots in	washer use.
	the washing compartment
Rust spots are visible in	are from particles from out-
the washing compart-	side the appliance (rust par-
ment.	ticles from the water pipe,	Close the lid of the special
	from pans, cutlery, etc.).
		salt container securely.
	Remove such spots with a
	commercially available stain-
	less steel cleaner.
There is a whistling	The whistling is not a cause	Use a different brand of
noise during washing.	for concern.	detergent.
Dishwasher interior	Mains plug is not plugged in.	Insert mains plug.
	Light bulb for the interior
lighting does not work.		Contact customer service.
	lighting is defective.

...the wash result is not satisfactory.

The dishes are still dirty.

–The wrong wash programme was selected.

–The dishes were arranged in such a manner that water has not reached all parts. The dish racks must not be overloaded.

33