AEG 80800 manual What to do, when, Error messages are displayed

Operating Instructions

What to do, when ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call in customer service to resolve one of the malfunctions listed here, or rectify an error made in the operation of the appliance, the customer service engineer’s visit is not free of charge, even during the period of guarantee.

... Error messages are displayed.

•If the multi-display shows the fault code (2 or if the display WATER (WATER; EAU), DOOR (DEUR; PORTE) or SPRAY ARM (SPROIE- ARM; BRAS) lights up, you may be able to remedy the fault yourself. After remedying the fault (2 and the fault with the display WATER (WATER; EAU), press the button of the started washing programme. The wash programme continues. If the fault code is displayed again, contact customer service.

•For all other faults that are indicated, please contact customer serv- ice stating the fault code.

Malfunction	Possible Cause	Remedy
The programme display of	Tap is blocked or furred	Clean tap.
	with lime-scale.
the selected programme
flashes, the display WATER	The filter (where present)
(WATER; EAU) lights up and	in the threaded hose fit-	Clean the filter in the
a constantly repeated	ting at the water inlet	threaded hose fitting.
warning tone can be heard.	valve is blocked.
No water runs into the dish-	The water inlet hose is
washer.		Check hose installation.
	not correctly laid.
The programme display of	The siphon is blocked.	Clean the siphon.
the selected programme
flashes, the multidisplay	The water drain hose is
shows the fault code and		Check hose installation.
constantly repeated warn-	not correctly laid.
ing tones can be heard.
The multidisplay shows the
fault code and constantly	The anti-flood system	Close the tap and contact
repeated warning tones	has been triggered.	customer service.
can be heard.

31