Instructions for the installer
12.6 Stability chain
The cooker is fitted with a stability device such as a proprietary stability chain as shown and firmly secured to the fabric of the building.
Whatever the position, remember to leave enough room for the cooker to be pulled out for cleaning and service.
The wall behind the cooker between the hotplate and 450mm above, and across the width of the cooker, must be an incombustible material such as ceramic wall tiles.
This appliance is designed not to project in front of standard 600mm worktops (excluding handles). To achieve the best fit the cooker must be pushed against the wall.
As this appliance is very heavy it should be situated on a suitably hard surface as to ensure servicing and installation is made possible with minimal impact on the floor surface.
