g
4Overview of the menu items
Below is an overview of those menu items where you can change and save the machine parameters that are preset at the factory, and also start programs and call up information. You will find detailed information on this in the fur- ther chapters of these operating instructions.
•«CHOOSE LANGUAGE» menu Display language; several languages are available for selection.
•«WATER HARDNESS» menu Programmable hardness level ranging from 1 (soft) to 4 (very hard). Factory setting: 4 (very hard).
•«TEMPERATURE» menu Programmable coffee temperature LOW, MEDIUM or HIGH.
Factory setting: HIGH
•«AUTO SHUTOFF TIME» menu Programmable
1 to 3 hours.
Factory setting: 1h (1 hour).
•«JUG PROGRAM» menu
–Programmable fill level (cup size) and quantity of ground coffee (cof- fee strength) for the cups to be filled into the jug
•«COFFEE PROGRAM» menu Adjust the fill level for each cup size (espresso cup, small cup, medium cup, large cup, mug).
•«DESCALE» menu
Start the descaling program.
•«STATISTICS» menu
Find out the number of cups of coffee dispensed, and the number of jugs pre- pared with either 4, 6, 8 or 10 cups and the total number of descalings carried out.
•«RESET TO DEFAULT» menu Reset the changed parameter settings to the factory settings.
5 Menu mode
You can switch to the Menu mode by pressing the "Menu" key. In Menu mode, you can navigate by means of the "1 cup of coffee" 
, "2 cups of
coffee“ 
, "Steam“ 
and "MENU“ keys. The respective function in each case is shown in the display above the key (Fig. 5):
•«<» ("1 cup of coffee" 
) and
«>» ("2 cups of coffee“ 
) are for "scrolling“ in the menu
•«OK» ("Steam“ 
) confirms a menu item
•«ESC» ("MENU“) returns to the last level of the menu without changing settings
6Before using for the first time
6.1Setting up and connecting the coffee machine
0Place the machine on a suitable hori- zontal, stable, unheated and water- resistant surface.
1Ensure that there is good air circula- tion. After positioning the appliance on the work top, leave a space of at least 5 cm between the surfaces of the appliance and the side and rear walls and at least 20 cm above the coffee maker.
Never install the appliance in environ- ments where the temperature may reach 0°C or lower (the appliance may be damaged if the water freezes).
1Important! If the coffee machine is brought into a warm room from a cold environment, wait about two hours before switching on!
We advise you to place the coffee machine on a suitable mat to prevent damage being caused by spray and splashes.
0Plug the coffee machine into an earthed mains socket. Do not use a socket that is not earthed.
37
