g
appliance. The upper line of the display
shows the alternating messages
«RINSING» and «TURN STEAM KNOB», whilst the lower line shows a progress bar with the percentage indi- cation
«
0Empty the container under the steam nozzle and replace it there.
0Turn the knob for steam and hot water
to the position 
.
A rinsing procedure with fresh water is carried out and the rinse water runs
out of the steam nozzle. The display shows «RINSING» and an advancing progress bar with a percentage indica- tion, e.g.
«
After a few minutes, the water tank will be empty and the upper line of the
display will show the alternating mes- sages «RINSING COMPLETE» and «TURN STEAM KNOB», whilst the
lower line shows a progress bar with the percentage indication
«
0Turn the knob for steam and hot water back to the position 
.
The display shows the alternating mes- sages «RINSING COMPLETE» and «FILL TANK».
0Empty the container with rinsing water.
0Remove water tank, fill it with fresh water and replace it.
The machine is now ready for use and its status is as for the last coffee mode selected.
3After running the descaling program, you are advised to throw away the first cup of coffee from the machine.
15 Ordering Accessories
To ensure years of satisfaction with your coffee machine and prevent faults arising, it is very important to descale the coffee machine regularly. The original descaling agent is obtaina- ble direct from us.
If you live in Germany, please call our Order Hotline:
1801 - 20 30 60*
(*Local tariff on Deutsche Telekom's landline network)
Monday to Friday 8.00 am - 6.00 pm
16What to do if you read fol- lowing messages on the display ...
«FILL TANK»
•The water tank is empty or is posi- tioned incorrectly.
0Fill the water tank, as described in sec- tion „Filling with water“, page 38, and insert it fully.
•The tank is dirty or encrusted with limescale.
0Rinse or descale the water tank.
«GROUND TOO FINE ADJUST MILL AND TURN STEAM KNOB»
•The appliance cannot make coffee.
0Place a container under the steam noz- zle and turn the knob for steam and hot water anticlockwise to the position 
(Fig. 9).
•The coffee runs off too slowly.
0Turn the knob for setting grinding tex- ture (Fig. 12) one click clockwise (see „Setting the grinding texture“,
page 46).
«EMPTY WASTE COFFEE CONTAINER»
•The waste coffee container is full.
0Empty the waste coffee container and clean it as described in the section „Emptying the waste coffee container“, page 50, then replace it.
53
