g
11 Preparing hot water
The hot water can be used to
1Caution! Danger of scalding when the hot water nozzle is activated! Hot water or steam output can cause scalding. Activate the hot water nozzle only when a container is under the hot water nozzle.
0Place a container under the hot water nozzle.
0Turn the knob for steam and hot water
to the 
position (Fig. 10). Hot water is dispensed; the display shows «HOT WATER».
3You should not run off hot water for more than two minutes at a time.
0After you have dispensed the hot water turn the knob for steam and hot water back to the 
position (Fig. 10) and remove the container.
12Setting the grinding texture
The appliance is preset to grind to a medium texture. If you find that coffee delivery is either too fast or too slow (in drips), the grinding texture can be adjusted during the grinding process.
1The grinder setting may be changed only while coffee is being ground. Making adjustments to the stationary grinder can damage the coffee machine.
0Set the grinding texture (Fig. 12) using the knob for setting the grinding tex- ture (Fig. 2, T).
•If the coffee is delivered a drop at a time or not at all, turn the knob one click clockwise.
Turn one click at a time until the coffee is delivered satisfactorily.
•If the coffee is delivered too fast and the crema is not to your tase, turn the knob one click anticlockwise.
3Avoid turning the knob for setting the grinding texture too far, otherwise when you select 2 cups, the coffee may emerge drop by drop.
3The effect of these adjustments will only be evident after at least 2 cups of coffee have been prepared.
Remove foreign objects from the grinder
Foreign objects such as small stones in the grinder can damage the grinder. A foreign objects in the coffee causes a loud, regular rattle. If you hear this noise while coffee is being ground, immediately switch off the coffee machine and call the Customer Service Centre.
13 Menu settings
13.1 Setting the language
You can choose between several lan- guages. Another language can be selected as follows:
0Press the "Menu" key (Fig. 4).
The menu item «CHOOSE LAN- GUAGE» appears.
0Confirm the menu item with the "OK" key (Fig. 5). The set language appears in the display.
0Press the scrolling keys "<" or ">" (Fig. 5) until the desired language appears.
0When the desired language is dis- played, confirm it with the "OK" key (Fig. 5). This language is now pro- grammed.
If "OK" is not pressed, after about
120 sec. the appliance returns auto- matically to the coffee mode without storing the setting.
3After programming, the display auto- matically returns to the menu item
«CHOOSE LANGUAGE».
0To return to the coffee mode, press the "Menu" key (Fig. 4) or wait about
120 sec. for the machine to return automatically to the coffee mode.
46
