g
«INSERT WASTE COFFEE CONTAINER»
•The waste coffee container has pro- bably not been replaced after cleaning.
0Open the service door and insert the waste coffee container.
«ADD PRE-GROUND COFFEE»
•With the ground coffee function selected, ground coffee has not been poured into the ground coffee filler.
0Add the ground coffee as described in chapter „Using
«FILL BEAN CONTAINER»
•The coffee beans have run out.
0Fill the coffee bean container, see „Fill- ing the coffee bean container“,
page 38
•If the coffee grinder is very noisy, this could mean a small stone in the coffee beans has blocked the grinder.
0Contact the Customer Service Centre.
«PLEASE DESCALE !»
•This indicates the presence of limescale in the appliance.
0The descaling procedure, described in the section „Running the descaling program“, page 52, needs to be per- formed as soon as possible.
«CLOSE DOOR»
•The service door is open.
0Close the service door. If the service door cannot be closed, check that the brewing unit is inserted correctly (see „Cleaning the brewing unit“, page 51)
«INSERT BREWING UNIT!»
•The brewing unit has probably not been replaced after cleaning.
0Insert the brewing unit; see „Cleaning the brewing unit“, page 51
«GENERAL ALARM»
•The inside of the appliance is very dirty.
0Thoroughly clean the inside of the appliance; see „Cleaning the brewing
unit“, page 51. If the message is still displayed after cleaning, contact the Customer Service Centre.
17Problems that can be resolved before calling the Customer Service Centre
If the appliance is not working, the causes of the malfunction can be iden- tified and resolved by referring to chapter „What to do if you read fol- lowing messages on the display ...“, page 53. If, on the other hand, no mes- sage is displayed, run the following checks before calling the Customer Service Centre.
The coffee is not hot
• The cups have not been preheated.
0
page 42).
•The brewing unit is too cold.
0Heat the brewing unit by selecting the rinsing program before making coffee (see „Running the rinsing program“, page 42).
The coffee is not creamy enough
•The coffee is ground too coarsely.
0Turn the knob for setting the grinding texture one click anticlockwise (see „Setting the grinding texture“,
page 46).
•Wrong type of coffee.
0Use a type of coffee for fully automa- ted espresso makers.
The coffee runs out too slowly
•The coffee is ground too finely.
0Turn the knob for setting grinding tex- ture one click clockwise (see „Setting the grinding texture“, page 46).
54
