AEG PROTECT 1.100, PROTECT 1.150, PROTECT 1.200 2General Information, 2.1Technology

i	PROTECT 1.	is an	Uninterruptible Power
	Supply (UPS) for essential loads such as small
	data centres,	servers,	network components,
	telecommunications equipment and similar units. It

consists of:

♦Mains filter with overvoltage protection (appliance protection / class D) and mains energy backfeed protection

♦Rectifier section with PFC logic (power factor correction unit)

♦Separate battery charger with

switch mode power supply technology

♦IGBT inverter for continuous supply of connected loads with sinusoidal AC voltage

♦Automatic electronic bypass (SBS) as additional, passive redundancy SBS = Static Bypass Switch

♦Manual bypass for maintenance and service purposes (with automatic SBS activation upon actuation)

♦Control unit

on the basis of digital signal processor technology