U104613-03 46

Read all instructions before installing or using this appliance.
Installation Instructions
Save these instructions for future reference.

Assemble the Grates

Each grate is different. Make sure that the grates
are in the correct position and sitting down.

Fit the Plinth

Fit the inner plinth to the bottom front of the
cooker using the five screws provided.
Fit the outer plinth (2 screws 1 each end) to the
inner plinth. The height of the outer plinth can be
adjusted by sliding it up or down via the slotted
hole.

To Adjust the Oven Door Angle

The door bottom hinge can be adjusted to alter the
angle of the door.
Loosen the bottom hinge fixing screws and use the
notch and a flat bladed screwdriver to move the
position of the hinge to set the hinge position.
Retighten the hinge screws.
Effect of hinge adjustment – exaggerated for clarity
Centre line of hinge pin
Oven door omitted for clarity
Range operational checks

Oven check

Set the clock to the time of day - the ovens will not
work if the clock is not set.
When the clock is first connected the display will
flash ( ) and ( ) alternately.
To set the clock to read the time of day turn and
hold the Setting knob to the clock symbol ( ) and
at the same time turn the Adjusting knob left or
right until the clock shows the time of day. This is a
12 hour clock. Let go of the Setting knob and it will
spring back to the vertical ( ) oven manual setting.
Turn on the oven and check that the oven fan starts
to turn and that the oven starts to heat up. Turn off
the oven.

Broiler

Open the broiler compartment door. Turn on the
broiler control and check that the broiler heats up.