Setting the Date & Time
1
2
Turn the power on, and set the camera to the Setup Menu (
page 16).
Select [
Date & Time].
yPress 
or 
to select [Date & Time] then press 
or the SET button to launch the submenu.
3 Set date and time.
yPress 
or 
to change the value of the cursor located. Press 
or 
to move the cursor between settings.
Tips 
yHolding down 
or 
changes the values continuously.
yFor date stamp setting (
page 31).
4 Apply the setting.
yAfter adjusting the settings, press the SET or the MENU button to apply the setting.
Caution
yIf the batteries are removed for about two days, the Date & Time setting will be lost. In this case, make these settings again.
8
