The rear panel - at a glance
Rear Panel Connections (see Chapter 3 in the User’s Guide for details)
1INH (Remote Inhibit) TTL input signal for externally disabling the power source. FLT (Discrete Fault Indicator) TTL output signal when there is a device fault.
2
3TRIGGER BNC connectors for external trigger inputs and &source; trigger outputs.
4GPIB connector and GPIB cable for remote controller.
5SENSE connections for remote voltage sensing at the load.
6Airflow Vents (do not block).
7OUTPUT power connections to the load. (φ2, φ3 connections available on Agilent 6834B only.)
8AC Input Line Fuses (Agilent 6814B/6834B/6843A only. Other models have internal fuses).
9LINE RATING label specifies power source required by the power source.
10AC Line Input connections from the power source.
4