How to use the front panel
Make sure the unit is turned on.
From the System key group
Local
Press Local to activate the front panel keypad if the unit is not already in local mode. (If the Local Lockout command is in effect, cycle power to return the unit to local mode.)
From the Function key group
Voltage
Press Voltage to select the voltage function. To select a different function, simply press the appropriate key.
To select a function appearing above a key (such as Current), first press the blue shift key, then press the key below the function.
| F U N C T I O N |
| S YS T E M |
| F U N C TI O N |
|
Harmonic | Current | Index |
| Harmonic | Current | Index |
Meter | Voltage |
| Local | Meter | Voltage |
|
Output | Phase | Index | Error | Output | Phase | Index |
Input | Freq |
| Address | Input | Freq |
|
Status |
|
| Save | Status |
|
|
Protect | Shape | Phase | Recall | Protect | Shape | Phase |
|
| Select |
|
|
| Select |
Trigger | List |
|
| Trigger | List |
|
Trigger | Pulse | Output |
| Trigger | Pulse | Output |
Control |
| on/off |
| Control |
| on/off |
NOTE: Pressing Output on/off, Phase Select, or (Shift) + Trigger immediately
implements the function. Display annunciators indicate that an immediate action has occurred. All other function keys have command menus underneath them that are accessed via the π and θ keys after the function key is pressed. Refer to “The front panel menus- at a glance”.
p |
| q |
|
|
|
Use these keys to move through the command menus of the selected function.
F U N C TI O N
Harmonic | Current | Index |
Meter | Voltage |
|
Output | Phase | Index |
Input | Freq |
|
Status |
|
|
Protect | Shape | Phase |
|
| Select |
Trigger | List |
|
Trigger | Pulse | Output |
Control |
| on/off |
7