1-8
Getting Started
Setting Up the Agilent 83434A
Step 4. Turn on the Agilent 83434A
With the power cable inserted into the line module, turn the lightwave
receiver on by pressing the line switch. The green light-emitti ng diode (LED)
should light.
NOTE The front panel LINE switch disconnects the mains circuits from the mains supply after
the EMC filters and before other parts of the instrument.
If the Agilent 83434A fails to turn on properly, consider the following possibili-
ties:
❒Is the line fuse good?
❒Does the line socket have power?
❒Is it plugged into the proper ac power source?
If the instrument still fails, return it to Agilent T echno logies fo r repair. Refer to
“Instrument Service” on page 3-18