3-10
Reference
Fiber-Optic Connectors
Figure3-2. Universal adapters to Diamond HMS-10.
The HMS-10 encases the fiber within a soft nickel silver (Cu/Ni/Zn ) center
which is surrounded by a tough tungsten carbide casing, as shown in
Figure3-3.
Figure3-3. Cross-section of the Diamond HMS-10 connector.
The nickel silver allows an active centering process that permits the glass fiber
to be moved to the desired position. This process first stakes the soft nickel
silver to fix the fiber in a near-center location, then uses a po st-active staking
to shift the fiber into the desired position within 0.2 ยตm. This process, plus the
keyed axis, allows very precise core-to-core alignments. This connector is
found on most Agilent Technologies lightwave instruments.