Agilent Technologies 81A, N5161A Getting Started Configuring the MXG ATE, 1 Web-EnabledMXG ATE2

Getting Started

Configuring the MXG ATE

Figure 2-1 Web-Enabled MXG ATE2

The Agilent MXG ATE supports LXI Class B* functionality. For more information on the LXI standards, refer to http://www.lxistandard.org/home.

*LXI Class B Compliance testing using IEEE 1588-2008 not available at release.

To operate the signal generator, click the keys.

Note:

If you do not see this window, check to see if the window is hidden behind your browser window or your web browser settings are set to block pop-ups. To use this feature, you need to set your web browser to allow pop-ups for your instrument’s IP address.

Remote SCPI commands requires the Telnet feature on the computer. The Telnet feature is available from a variety of sources. Some software updates can block (break) this Telnet connection (e.g. Internet Explorer 7). When using Internet Explorer as a browser, only versions <Internet Explorer 7 enable the Web-Enabled MXG SCPI feature.

8 Agilent N5161A/62A/81A/82A/83A MXG Signal Generators Installation Guide