Step 3 Once you clicked the Renew or Connect button, you should see some numbers under WAN Status. This means you have successfully established Internet connection.

Note: If you still see all 0’s after clicking on the Renew or Connect button, try the troubleshooting tips at the end of this manual.

4.2 Connecting to the Router Wirelessly

Below are the default wireless settings of the router. You must configure your wireless network adapter to the same settings in order to establish a wireless connection with the router. Please refer to your wireless network adapter’s manual on how to configure these settings.

SSID: default

Operating Mode: Infrastructure

Authentication: Open System

Channel #: 11

WEP: disabled

You may need to restart your computer after establishing a signal strength/link quality with the router.

14

Page 14
Image 14
Airlink101 AR325W manual Connecting to the Router Wirelessly, Ssid default, WEP disabled