Aiwa AV-D30 manual Recording An Audio Source, Ti Play A Dvd Recorded In Dolby Digital Surround

T(I PLAY A DVD RECORDED IN DOLBY DIGITAL SURROUND

This receiver has the 5.1 INPUT connectors supporting Dolby Digital decoder with the 5,1 ch output terminals. When a DVD player that contains a Dolby Digital decoder is connected to the receiver, you can enjoy theater-quality audio right in your home when playing discs recorded in Dolby Digital Surround.

RECORDING AN AUDIO SOURCE

TAPE< MONITOR 1

1 Press the VIDEO 1/5.1 CH button to select the VIDEO 1 (DVD or MD) function.

2 Press the VIDEO 1/5.1 CH button again.

“5.1 CH” appears on the display and the DVD player

connected to the 5.1 INPUT terminals is selected as a source,

3 Start playing the DVD recorded in Dolby Digital Surround.

To resume the VIDEO 1, DVD (2 ch stereo) or MD function, press the VIDEO 1/5.1 CH button again.

m

●The 5.1 CH function is automatically canceled and the VIDEO 1, DVD or MD function is selected:

-when the Dolby Pro Logic is turned on

-when headphones are plugged in

●The 5.1 CH function cannot be selected while headphones are plugged in.

1 Select the program source to be recorded.

Press one of the function buttons,

2Set the tape deck or MD recorder to the recording mode.

3Start the selected program source.

To monitor recorded sound during recording (wheln the connected tape deck is a three-head system)

Press the TAPE MONITOR button. “TAPE ON” appears cm the display for four seconds, and then the source name selected in step 1 comes back on. To cancel the tape monitor, press it again so that “TAPE OFF” appears.

m

●Any sound controll system has no effect on recording (see page

7). m

●Input sound through the 5.1 INPUT terminals cannot be recorded. When recording the sound from the DVD player, connect the AUDIO OUT (DOWN MIXING) terminals of the DV[) player to the VIDEO l/DVD/MD AUDIO IN terminals of the unit.

ENGL/S,H 1 I()