Aiwa AV-D30 manual Custom Audio Adjustment”, Super T-Bass System, Volume Control, Mu+Ng Balance

CUSTOM AUDIO ADJUSTMENT”

MU+NG BALANCE

SUPER T-BASS SYSTEM

The T-BASS system enhances the realism of low-frequency

sound.

Press the T-BASS button.

Each time it is pressed, the level changes. Select one of the three levels, or the off position to suit your preference.

VOLUME CONTROL

Turn the VOLUME control on the unit, or press the VOLUME buttons on the remote control.

The volume level is shown on the display for four seconds. It can be adjusted between O and MAX (31). It flashes when being set over thp level 21.

The volume level remains -memorized even after the power is turned off. However, if the power is turned off when the volume is set to more than 17, it is automatically set to 16 the next time the power is turned on.

To adjust the Ieft/right balance of the front speakers

Press the BALANCE button to display “L/R OdB. Then press the DOWNV or UPA button repeatedly within four seconds. Note that the front speakers balance of the 5.1 CH and Dolby Pro Logic modes is also changed.

,.

To mute the sound temporarily

Press the MUTING button (-20 dB).

“MUTE ON” appears on the display for four seconds. While muting the sound, the selected function indicator flashes. Press the MUTING button again to restore the sound.

m’

Low-frequency sound may be distorted when the T-BASS system

is used for a disc or tape in which low-frequency sound is originally emphasized. In this case, cancel the T-BASS system.

SOUND ADJUSTMENT DURING

RECORDING

The output volume and tone of the speakers or headphones . may be freely varied without affecting the level of the recording.

/-

,’