DSP SURROUND
DSP
DSP MULTIJOGMANUAL SELECT
(
~o
@@
F
DOW”N,UP
The DSP (Digital Signal Processor) surround circuits can recreate the effect of sounds reflected from walls or ceilings, to obtain the sound Ipresence of real environments. There are four modes with matching graphic equalization modes. Equalization modes are selected automatically and can also be selected or turned off to suit yolur preference.
Press the DSP button, and turn the MULTI JOG until the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the indicators ➤appear on the left sides of the selected DSP name and matching GE(2 mode name.
Selected DSP mode
Matching GEQ mode
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE, HALL or ARENA is selected, no sound will be heard from the surround speakers.
I o cancel me seIecIea moae
Press the DSP button again. “DSPOFF” appears on the displi~y. Even if canceling the selected DSP mode, the! matclhing or selected GEQ mode still remains.
To select with tlhe remote control
Press the DSP button repeatedly until the desired DSP mode is displayed.
Four DSP modes and “DSPOFF can be selected.
To adjust the volume and balance of the surround
speakers
Press the MANUAL SELECT button on the remot[? control twice or three times, while the DSP system is turned on, to display “S- R OdB (for right surround speaker) or
Note that the surround speakers volume and balance of the 5.1 CH and Dolby Pm Logic modes are also changec~.
●The DSP system is autonnatically canceled:
-when the Dolby Pro Logic is turned on
-when the 5.1 CH functicm is selected
●The DSP system cannot be turned on:
-while the 5.1 CH function is selected
-while headphones are plugged in
ENGLWH 10
