BEFORE OPERATION
POWER | TAPE MONITOR | |
I | I | Function indicators |
PHONES I FRbNTSPEAKERA,B I ENTER
ECO | MULTI JOG |
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. When the POWER button is pressed to turn on, the VOL (volume) level or function name is displayed one after the other.
The selected function indicator lights up in red and the others in green.
To change the brightness level of the display
1Press ECO so that “ECOMODE” is displayed.
2Within 4 seconds, turn the MULTI JOG to display DIM MODE, and then press the ENTER button within 4 seconds.
3Wtthin 4 seconds, turn the MULTI JOG to select the dimmer mode as below.
The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3.
DIM OFF *DIMMER 1- DIMMER 2 _ DIMMER 3
DIMMER1: The illumination of the display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer than DIMMER 1.
DIMMER 3: The illumination of the display is dimmer than DIMMER 2. The function indicators go out.
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button to zON.
To use speaker system B: Set the FRONT SPEAKERS B button to wON.
To use both speaker systems: Set both the buttons to ~ ON. Set the button(s) to ~OFF to turn off the speaker system(s).
As the front speaker systems A and B are connected in series:
-The sound will be slightly decreased when using both speaker systems
-No sound can be heard if the FRONT SPEAKERS A and B buttons are set to w ON when only one speaker system is connected
Using the headphones
Connect headphones to the PHONES jack with a standard stereo plug (06.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS A and B buttons to 10FF. Otherwise sound is output from the speakers.
The 5.1 CH function, Dolby Pro Logic or DSP system is automatically canceled when the headphones are plugged in.
To turn the unit off, press the POWER button.
7 ENGLISH
