BEFORE OPERATION
To turn the unit on
Press the POWER button.
Operation is possible after four seconds. The VOL (volume) level or function name is displayed one after the other for the first four seconds.
The selected function indicator lights up in red.
To change the brightness level of the display
1Press the ECO button repeatedly until “DIM MODE” is displayed.
2Within 4 seconds, press the ENTER button.
3Within 4 seconds, turn the MULTI JOG to select the dimmer mode as below.
The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3.
- 
DIMMER 1: The illumination of the display is dimmer than usual.
DIMMER 2: The illumination of the display is dimmer than DIMMER 1. The function indicator turns off.
Using the headphones
Connect headphones to the PHONES jack with a standard stereo plug (ø 6.3 mm, 1/4 inch). Be sure to set the FRONT SPEAKERS A and B buttons to hOFF. Otherwise sound is output from the speakers.
NOTE
When the headphones are plugged in:
-The Dolby Pro Logic or DSP system is automatically canceled
-The Dolby Digital surround mode or the DTS surround mode is changed to the “2chSTEREO (2CH DOWNMIX)” mode
To select the front speaker system
To use speaker system A: Set the FRONT SPEAKERS A button to HON.
To use speaker system B: Set the FRONT SPEAKERS B button to HON.
To use both speaker systems: Set both the buttons to HON. Set the button(s) to hOFF to turn off the speaker system(s).
NOTE
As the front speaker systems A and B are connected in series:
-The sound will decrease slightly when using both speaker systems
-No sound can be heard if the FRONT SPEAKERS A and B buttons are set to HON when only one speaker system is connected
To turn the unit off, press the POWER button.
POWER ECONOMIZING (ECO) MODE
Setting this unit to the ECO mode reduces power consumption as below.
Initial setting of the ECO mode is ON.
•When the current time is set, the clock display disappears immediately.
•While the power is off, all the display lights turn off, and only the indicator on the left side of the display window lights in red.
To cancel the ECO mode
1Press the ECO button to display ECO MODE while the unit is turned on.
2Within 4 seconds, press the ENTER button.
3Within 4 seconds, turn the MULTI JOG to select ECO OFF. The mode will be automatically set after 4 seconds. It will also be set if the ENTER button is pressed within 4 seconds after step 3.
