Aiwa CX-NA92 Continuous Play, Music Sensor, Insert tapes into deck 1 and deck, DOLBY NR system

MUSIC SENSOR

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

Press the < or ➤> button during playback referring to the playback side indicator (< or F) on the display.

For example, when the ➤P button is pressed while P is displayed, playback of the next track starts.

Music sensor function may not be able to detect tracks under the following conditions:

●Blanks of less than 4 seconds between tracks

●Noisy blanks

●Long passages of low-end sound

●Low overall recording levels

CONTINUOUS PLAY

About cassette tapes

*To prevent accidental erasure, break off the plastic tabs on the cassette tape after recording with a screwdriver or other pointed tool.

Side A

.O

<Q

\;0>

a

40

Type II tape	Tab for side A
detection
slot	*

\

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

●120-minuteor longer tapes are extremely thin and easily deformed or damaged. They are not recommended.

●Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism.

2

1

After playback on one deck finishes, the tape in the other deck will start to play without interruption.

1 Insert tapes into deck 1 and deck 2.

2 Press the TAPE/DECKl/2 button to select he deck to be played back first.

3Press the REV MODE button to select =).

4Press the 4 b button to start playback.

Playback continues until the N button is pressed.

(’

DOLBY NR system

The Dolby Noise Reduction system reduces tape hiss noise. For optimum performance when playing back a tape recorded with the DOLBY NR system, turn on the DOLBY NR system,

ENGLISH 14