Aiwa CX-NA92 manual Preset Number Tuning, Press the TUNER/BAND button to select a band

PRESET NUMBER TUNING

Use the remote control to select the preset number directly.

1 Press the TUNER/BAND button to select a band.

2 Press the numbered buttons to select a preset number.

Example:

To select preset number 20, press the +10, +10 and Obuttons.

To select preset number 15, press the +10 and 5 buttons.

Selecting a preset number on the main unit

Press the TUNER/BAND button to select a band. Then, press the 4 ➤ DIRECTION/PRESET button repeatedly.

Each time the button is pressed, the next ascending number is selected.

To clear a preset station

Select the preset number of the station to be cleared. Then, press the ■ CLEAR button, and press the II SET button within 4 seconds.

The preset numbers of all other stations in the band with higher numbers are also decreased by one.

❑

To change the AM tuning interval

The default setting of the AM tuning interval is 10 kHz/step. If you use this unit in an area where the frequency allocation system is 9 kHz/step, change the tuning interval.

Press the POWER button while pressing the TUNER/BAND button.

To reset the interval, repeat this procedure.

m

When the AM tuning interval is changed, all preset stations (see “PRESETTING STATIONS”) are cleared. The preset stations have to be set again.

ENGLISH 10