Aiwa CX-NA92 manual Dubbing A Tape Manually, Dubbing The Whole Tape, Press the TAPE button

Models: CX-NA92

1 80
Download 80 pages 16.17 Kb
Page 17
Image 17
DUBBING A TAPE MANUALLY

DUBBING A TAPE MANUALLY

m

Set the tape to the point where recording will start. The reverse mode is automatically set to 1.

Note that recording will be done on one side of the tape only.

1 Press the TAPE button.

2Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert the tapes with the sides to be played back or recorded on facing out from the unit.

3Press the DOLBY NR button to turn off the Dolby NR.

ilEl NR on the display goes out.

4Press the TAPE/DECK 1/2 button to select deck 1.

“TP1” is displayed.

5Press the REC/REC MUTE button to start recording.

Playing and recording start simultaneously.

To stop dubbing

Press the button.

To set the Dolby NR when playing back the dubbed tape

Press the DOLBY NR button and turn Dolby ;NR on or off to match the original tape.

.

DUBBING THE WHOLE TAPE

This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start simultaneously as soon as the longer tape has been reversed.

w

Dubbing does not start from a point halfway in the tape. The reverse mode is automatically set to =).

The Dolby NR does not affect recording.

1 Press the TAPE button.

2 Insert the original tape into deck 1 and the tape to be recorded on into deck 2.

Insert each tape with the side to be played back or recorded on first facing out from the unit.

3Press the SYNC DUB button once or twice to start recording.

@For recording at normal speed, press it once to display NORM-DUB,

~For recording at high speed, press it twice to display

HIGH-DUB, - -

The tapes are rewound to the beginning of the front sides, and recording starts.

To stop dubbing

Press the button,

To set the Dolby NR when playing back the dubbed tape Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.

m

Recording does not start, if the erasure prevention tab on either side of the tape is broken off.

ENGLISH 16

Page 17
Image 17
Aiwa CX-NA92 manual Dubbing A Tape Manually, Dubbing The Whole Tape, Press the TAPE button, To stop dubbing