PRESETTING STATIONS + EI
The unit can store a total of 32 preset stations. When a station is stored, a preset number is assigned to the station. Use the preset number to tune into a preset station directly.
1 Press the TUNEFUBAND button to select a band,
and press the W DOWN or UP M button to select a station.
2 Press the II SET button to store the station.
A station is assigned to a preset number, beginning from 1 in consecutive order for each band.
DISPLAY
@The frequency
@The preset number
@The preset numbers
The selected preset number flashes.
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations have already been stored for all the bands.
m
Each band can only store a maximum of 16 preset stations.
PRESET NUMBER TUNING + EI
Use the remote control to select the preset number directly.
7 Press the BAND button to select a band.
2 Press the numeric buttons to select a preset number.
Example:
To select preset number 10, press the +10 and O buttons.
Selecting a preset number on the main unit
Press the TUNER/BAND button to select a band. Then, press
the +* DIR/PRESET button repeatedly.
Each time the button is pressed, the next higher number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press the ■ CLEAR button, and press the II SET button within 4 seconds.
The preset numbers of all other stations in the band with higher numbers are also decreased by one.
