Aiwa LCX=300 manual Optional, Listening To External Sources + Ei, Equipment, Connecting, Video/Aux

			CONNECTING				OPTIONAL
			EQUIPMENT				+	❑
			Refer to the operating instructions of the connected equipment
			for details.
			. The connecting cords are not supplied, Obtain the necessary
			connecting		cords.
			● Consult your local Aiwa dealer for recommended equipment.
			VIDEO/AUX			JACKS
			Sound signals can be input to this unit through the jacks.
			Use a cable with RCA phono plugs to connect audio equipment
A	DC= IN12V	“--”	(turntables,		LD players		with analog output jacks, VCRs, etc.).
	Q-G+	I	Connect	the	red plug		to the	R jack, and the white plug to the L
			jack.
			When	connecting		a turntable
			Use an Aiwa turntable equipped with a built-in equalizer amplifier.

SUPER WOOFER JACK

Connect an optional powered sub woofer with a built-in-amplifier to the jack.

DC JACK (12 V)

Connect the Aiwa DCW-50 car battery cord to the jack. Then connect the other end to the cigarette lighter socket of the car. ● When the unit is used with the car battery cord, the clock does

not operate.

c After switching from DC voltage to AC voltage, the current time must be set again.

● Use the Aiwa DCW-50 car battery cord only.

● When operating on car battery (DC 12 V), the POWER button on the remote control does not operate. Press the POWER button on the unit to turn the unit on. After the power is turned on, the remote control is operational.

LISTENING TO EXTERNAL

SOURCES + EI

To play equipment connected to the VI DEO/AUX jacks, proceed as follows.

1 Press the AUX/VIDEO button.

“AUX is displayed.

2 Play the connected equipment.

34