PRESET NUMBER TUNING

2

1

Use the remote control to select the preset number directly.1 Press the TUNER/BAND button to select a band.2 Press the numeric buttons to select a preset number.Example:

To select preset number 25, press the +1O,+1Oand 5 buttons. To select preset number 10, press the +1O and O buttons.

Selecting a preset number on the main unit

Press the TUNER/BAND button to select a band. Then, press the <E DIRECTION/PRESET button repeatedly.

Each time the button is pressed, the next highest number is selected.About cassette tapes

●To prevent accidental erasure, break off the plastic tabs on ths cassettetapesfter recordingwitha screwdriveror otherpointedtool.

Side A

, <Q;i!=z

 

 

Q

 

 

e

 

 

Type II tape

Tab for side A

 

detection

 

 

slot

 

 

[3”–)

 

To record on the tape again, cover the tab openings with adhesive tape, etc. (On Type II tapes, take care not to cover the Type II tape detection slot.)

●120-minute or longer tapes are extremely thin and easily deformed

or damaged, They are not recommended.

. Take up eny slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism,

DOLBY NR syste

The Dolby Noise Reduction system reduces tape hiss noise.

For optimum performance when playing back e tape recorded with the DOLBY NR system, turn on the DOLBY NR system.

BASIC OPERATIONS

DEcK1/2REV MODE

..

A

~

Deck 2

INSERTING TAPES

●On Deck 1, tapes are always played back on both sides.On Deck 2, you can select a reverse mode to play back one or both sides.

●Use Type I (normal), Type II (high/CrOz) or Type IV (metal) tapes for playback.

Press theTAPE button and press the& EJECT mark to open the cassette holder. ‘

A

Insert a tape with the exposed side down. Push the cassette holder to close.To select a reverse mode (Deck 2 only)Each time the REV MODE button is pressed, the reverse mode changes.

L-=,-+z)+- CZ)J

To play one side only, turn on Z.

To play from front side to back side once only, turn on 1). To play both sides repeatedly, turn on C=).

●When tapes are loaded in both decks, 1> in the display indicatee Continuous Play.

~ ENGLISH