DUBBING A TAPE MANUALLY

Preparation

. Set the tape to the pointwhere recordin9 will start.

*The reverse mode is automatically set to 1. Note that recording will be done on one side of the tape only,

Press the TAPE button,Insert the original tape into Deck 1 and the tape to be recorded on into Deck 2.

Insert the tapes with the sides to be played back or recorded on first facing out from the unit.

Press the DOLBY NR button to turn off the Dolby NR.

no NR on the display goes out.

Press the TAPE/DECK 1/2 button to select Deck 1.

TAPE 1 is displayed.

Press the @ REC/REC MUTE button to start recording.Playing and recording start simultaneously.To stop dubbingPress the ■ button.10 set the Dolby NR when playing back the dubbed tape

Press the DOLBY NR button and turn Dolby NR on or off to

match the original tape,
DUBBING THE WHOLE TAPE

This function allows you to make exact copies of both sides of the original tape. The reverse side of both tapes will start

simultaneously as soon as the longer tape has been reversed.

m

● Dubbing does not start from a point halfway in the tape.

● The reverse mode is automatically set to Z>. ● The Dolby NR does not affect recording.

1 Press the TAPE button.2Insert the original tape into Deck 1 and the tape to be recorded on into Deck 2.

Insert each tape with the side to be played back or recorded on first facing out from the unit.

3Press the SYNC DUB button once or twice to start 6 recording.@For recording at normal speed, press it once to display N-DUB.@For recording at high speed, press it twice to display H- DUB,

0@

The tapes are rewound to the beginning of the front sides, and recording starts.

To stop dubbingPress the ❑ button.To set the Dolby NR when playing back the dubbed tape

Press the DOLBY NR button and turn Dolby NR on or off to match the original tape.

●Recording does not start, if the erasure prevention tab on either side of the tape is broken off.

●If the leader segment of the tape to be recorded on is longer than that of the original tape, recording on the reverse side may stop midway through the recording. In this case, dub each side manually following the procedure in “DUBBING A TAPE MANUALLY”,

ENGLISH I 4