| Main unit |
| |
| FM tuner | section |
|
Turning range | 87.5 MHz to 108 MHz | |
Usable sensitivity (IHF) | 13,2 dBf | |
Antenna terminals | 75 ohms (unbalanced) | |
AM tuner | section |
|
Tuning range | 530 kHz to 1710 kHz (10 kHz | |
|
| step) |
|
| 531 kHz to 1602 kHz (9 kHz step) |
Usable sensitivity | 350 pV/m | |
Antenna |
| Loop antenna |
| Amplifier | section |
|
| Speaker system |
|
|
|
| |
Cabinet type |
| 3 way, bass reflex | (magnetic | ||
|
| shielded type) |
|
| |
Speakers |
| Woofer: |
|
|
|
|
| 140 mm (55/8 | h.) | cone | type |
|
| Tweeter: |
|
|
|
|
| 60 mm (23/8in.) cone type | |||
|
| Super tweeter: |
|
| |
|
| 20 mm (13/16 | in.) | Ceramk | type |
Impedance |
| 6 ohms |
|
|
|
Output sound pressure level | 87 dB/Wlm |
|
|
| |
Dimensions | (W x H x D) | 235 x 302 x 250 mm (93/8 x 12 x | |||
|
| 9’/8 in, ) |
|
|
|
Weight |
| 3,5 kg (7 Ibs 6 OZ.) |
| ||
| General |
|
|
|
|
|
Power requirements | 120 VAC, 60 Hz |
|
| ||
Power consumption | 130W |
|
|
| |
Dimensions | of main unit | 260 x 308 x 339 mm |
| ||
Power output
Total harmonic distortion
Inputs
outputs
Front
100 watts per channel, Min. RMS at 6 ohms, from 50 Hz to 20 kHz, with no more than 1% Total Harmonic Distortion
Rear (Surround)
10 watts per channel, Min. RMS at 16 ohms, 1 kHz, with no more then 170Total Harmonic Distortion Center
20 watts, Min, RMS at 8 ohms, 1 kHz, with no more than 1 “ATotal Harmonic Distortion
0.1% (50 W, 1 kHz, 6 ohms, DIN AUDIO/Front)
VIDEO/AUX: 150 mV (adjustable) MIC 1, MIC 2:1 mV (10 kohms) LINE OUT 200 mV
SUPER WOOFER: 2.45 V
SPEAKERS: accept speakers of 6 ohms or more
SURROUND SPEAKERS: accept speakers of 16 ohms or more
CENTER SPEAKER: accept speakers of 8 ohms or more PHONES (stereo jack): accepts headphones of 32 ohms or more
(W XHXD) | (10’/, x 12’/, x 133/6in.) |
Weight of main unit | 9.5 kg (20 Ibs 15 OZ.) |
Specifications and external appearance are subject to change without notice.
WW5YSTEA4
The word “BBE”and the “BBEsymbol” are trademarks of BBE Sound, Inc.
Under license from BBE Sound, Inc.
DOLBY NR/DOLBY PRO LOGICManufactured under license from Dolby Laboratories Licensing
Corporation.❑ “DOLBY”, the
Please check the laws on copyright relating to recordings from discs, radio or external tape for the country in which the machine is being used,
NOTEThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
| Cassette | deck section |
|
Track format | 4 tracks, 2 channels stereo | |
Frequency | response | CrO, tape: 50 Hz |
|
| Normal tape: 50 Hz – 15000 Hz |
60 dB (Dolby B NR ON, CrO, tape | ||
|
| peak level) |
Recording | system | AC bias |
Heads |
| Deck 1: Plavback head x 1 |
|
| Deck 2: Recording/playback/ |
|
| erase head x 1 |
| Compact disc player | section |
Laser | Semiconductor laser (k= 780 nm) |
1 bit dual | |
90 dB (1 kHz, OdB) | |
Hlarmonic distortion | 0.03 % (1 kHz, OdB) |
Wow and flutter | Unmeasurable |
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi- cations. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged totrytocorrect the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna,
-Increase the separation between the equipment and re- ceiver.
-Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
CAUTIONModifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.
ENGLISH 24