BASIC OPERATIONS

Watching a TV program

SLEEP

POWER

Number buttons

+100

PREV.CH

VOLUME +/–

MUTE

CHANNEL N/M

PHONES \ jack

CHANNEL

POWER

 

 

VOLUME +/–

N/M

 

1 Press POWER on the remote control to turn on the TV.

If POWER on the TV is not pressed, you cannot operate the TV even by pressing POWER on the remote control.

2 Press CHANNEL Nor M repeatedly or the number buttons to select the channel number.

When you use the number buttons, press the button as follows:

Example

To select the channel 7, press 0 then 7. To select the channel 77, press 7 then 7.

To select the channel 107, press +100, 0 then 7.

3 Press VOLUME + or – to adjust the volume.

To turn off the TV

Press POWER on the remote control.

The 6 STANDBY indicator on the TV lights.

You can turn the TV on or set the TV to the standby mode by pressing POWER on the remote control.

Press POWER on the TV to turn the main power off.

To mute the volume

Press MUTE. “MUTE” appears for a few seconds.

To restore the volume, press MUTE or VOLUME + or –.

To recall a previous channel

Press PREV. CH to switch back and forth between the current channel and the previous one.

Tip

To listen through the headphones, insert the headphones (not supplied) with a stereo mini plug into the PHONES \ jack on the front. The sound from the TV speaker is muted.

Notes

The TV automatically turns to the standby mode approximately 15 minutes after a television station has stopped broadcasting.

In standby mode, CHANNEL N or M on the TV also can turn on the power.

Setting the sleep timer

Press SLEEP repeatedly to select the number of minutes after which to turn off.

The minutes change up to 120 minutes as follows.

OFF 15 30 60 90 120

SLEEP 30

After the set amount of time has elapsed, the TV turns to the standby mode.

To check the remaining sleep time

Press SLEEP once. The remaining time appears on the screen.

To cancel the sleep timer

Press SLEEP repeatedly until “SLEEP OFF” appears.

Note

The remaining time appears automatically 5 minutes and 1 minute before the TV turns off.

For example, 5 minutes before turning off, “SLEEP 5” appears.

ENGLISH 10

Page 15
Image 15
Aiwa TV-F2000u, TV-F2400u, TV-F2400u, TV-F2000u manual Watching a TV program, Setting the sleep timer