Aiwa TV-F2000u, TV-F2400u manual Connecting the antenna, Connect the AC cord to the AC wall outlet

PREPARATION

Connecting the antenna

Basic connections

TV-F2000

75-ohm coaxial cable (not supplied)

1

AC cord hook	To ANTENNA connector
(TV-F2000 only)

2 To AC outlet

1 Connect the antenna cable to the ANTENNA connector on the TV.

300-ohm twin-lead cable (not supplied)

Antenna adaptor (supplied)

If the cable is a round-type 75-ohm coaxial cable, connect it directly to the ANTENNA connector.

If the cable is a flat-type 300-ohm twin-lead cable, connect it to the antenna adaptor (supplied), and connect the adaptor to the ANTENNA connector.

2 Connect the AC cord to the AC wall outlet.

When you are using TV-F2000, connect the AC cord after passing it through the AC cord hook on the rear.

To prevent the unit from falling during earthquakes, etc.,

Fix the unit even to a wall or pillar with the security hook located on the rear using the strong twine or wire.

	Security hook		Security hook
TV-F2000		TV-F2400

Strong twine or wire

(not supplied)

Strong twine

or wire

(not supplied)

CONTINUE

ENGLISH 4