CONNECTIONS (CONTINUED)
E Connecting to an AV receiver equipped with a DTS decoder
Use either a commercially available optical cord or a 75 ohm coaxial cord when connecting the unit to an AV receiver with a Digital In jack. The supplied video cord is also available instead of a coaxial cord.
TV
yellow
to the video input jack (yellow)
Video cord (supplied)
| to VIDEO OUT |
| yellow |
Rear of the unit | jack (yellow) |
|
DIGITAL
OUT
OPTICAL
DIGITAL
OUT
COAXIAL
COMPONENT
VIDEO
OUT OUT
AUDIO COMPONENT AUDIO OUT 2 VIDEO OUT OUT 1
L | Pb | L |
R | Pr | R |
| Y | VIDEO |
|
| |
|
| OUT |
to DIGITAL OUT OPTICAL jack
Optical cord (not supplied)
to the digital input jack
to DIGITAL OUT COAXIAL jack
or Coaxial cord | to an AC outlet |
(not supplied) |
|
Receiver equipped with a
DTS decoder
Front |
|
| Front |
speaker (L) |
|
| speaker (R) |
Surround speaker (L) | Center speaker | Subwoofer | Surround speaker (R) |
When your TV is equipped with an
Set the setup menu correctly after connecting!
Set the “TV Aspect” and “Digital Audio Output” of the setup menu according to the audio equipment and TV connected to the unit as follows:
(See “CHANGING SETUP VALUE” on page 38 for details.)
Digital Audio Output
Stream/PCM
TV Aspect
When your TV is a
When your TV is a
14 ENGLISH
NOTE
If picture noise appears while playing
CAUTION
When connecting an AV receiver not equipped with a DTS decoder using an optical or coaxial connecting cord, do not select “Stream/PCM” in the “Digital Audio Output” of the setup menu.
Merely attempting to play a DVD may cause a screeching noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “PCM” in the “Digital Audio Output.”
AIWA
