SPECIFICATIONS

Power supply

120 V AC, 60 Hz

Power consumption

16 W

 

 

Power consumption in standby mode

 

2.9 W

 

 

Weight

3.2 kg (7.1 lbs)

External dimensions

430

88

245 mm (w h d)

 

(17

3.5

9.9 inches)

Laser

Semiconductor Laser,

 

wavelength 650/780 nm

Signal format

NTSC

 

Supported discs

DVD video discs

 

12 cm (single-sided single-layer,

 

single-sided double-layer,

 

double-sided double-layer)

 

8 cm (single-sided single-layer,

 

single-sided double-layer,

 

double-sided double-layer)

 

Compact discs (CD-DA, video CD)

 

12 cm and 8 cm discs

S video output

Y output: 1 Vp-p (75 ohms, sync

 

negative)

 

C output: 0.286 Vp-p

 

1 Mini Din 4 pin

Video output

Video composite output

 

1 Vp-p (75 ohms, sync negative)

 

1 RCA jack

 

Video component output

 

Y output: 1 Vp-p (75 ohms, sync

 

negative)

 

PB,PR output: 0.7 Vp-p (75 ohms)

 

1 RCA jacks (PB,PR, Y)

Audio output

Digital output

 

0.5 Vp-p (75 ohms)

1 Fiber optical connector

1 RCA jack Analog output

2.0 Vrms (1 kHz, 0 dB, 330 ohms)

2 RCA jacks (L/R)

Audio output characteristics

Signal to noise ratio

More than 105 dB (EIAJ) Dynamic range

More than 95 dB (EIAJ) Harmonic distortion

0.003%

Frequency range:

CD/VCD: 2 Hz to 20 kHz

DVD:2 Hz to 22 kHz (48 kHz

sampling)

2 Hz to 44 kHz (96 kHz sampling)

Wow and flutter: unmeasurable

Operating conditions 5˚C to 35˚C (41˚F to 95˚F)

Accessories Video cable (1)

Audio cable (1)

Remote control (1)

Specifications are subject to change without notice.

NOTE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

CAUTION

Modifications or adjustments to this product, which are not expressly approved by the manufacturer, may void the user’s right or authority to operate this product.

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double- D symbol are trademarks of Dolby Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories. All rights reserved.

Manufactured under license from Digital Theater Systems, Ino. US Pat. No. 5,451,942 and other worldwide patents issued and pending. “DTS” and “DTS Digital Surround” are trademarks of Digital Theater Systems, Inc. ©1996 Digital Theater systems, Ino. All rights reserved.

ENGLISH 47

AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)

AS NECESSARY

En

Page 47
Image 47
Aiwa XD-DV380U operating instructions Specifications