Aiwa XD-DV380U Connecting to a TV or monitor with component video input connectors

ENGLISH 17
En
PREPARATIONS
AIWA XD-DV380U 8B-AV3-905-01 (010209AMK-Y-L)
Connecting to a TV or monitor with component video input connectors
Before connecting!
Set the VIDEO OUT switch to COMPONENT when
connecting to a TV with component video input jacks.
Tip
Video signals are always output from VIDEO OUT jack on
the unit regardless of this setting.
Component video output jacks (PB/PR/Y)
The component video output jacks output the different
color signals (P
B /P R ) and luminance signal (Y) separately
in order to achieve high fidelity in reproducing colors.
The description of the component video output
connectors may differ depending on the connected
TV or monitor (e.g. PB/PR/Y, CB/CR/Y, B-Y/R-Y/Y, etc.).
Refer to the operating instructions of the TV for details.
TV or monitor
Video cables (not supplied)
to video input jacks
(PB/PR/Y)
Rear of the unit
to COMPONENT VIDEO
OUT (Pb/Pr/Y) jacks
Set the setup menu correctly after connecting!
Set the “TV Aspect” of the setup menu according to the
audio equipment and TV connected to the unit as follows:
(See “CHANGING SETUP VALUE” on page 38 for details.)
TV Aspect
When your TV is a conventional-screen size TV:
4:3 Letterbox
When your TV is a wide-screen size TV:
16:9 Wide
NOTE
If picture noise appears while playing copy-protected DVDs,
connect the unit directly to a TV. Do not connect through a
VCR, TV/VCR, or AV selector.
to an AC outlet
Set the VIDEO OUT switch to COMPONENT
DIGITAL
OUT
VIDEO
OUT
S-VIDEO
COMPONENT
S-VIDEO
OUT VIDEO OUT
DIGITAL
OUT
COMPONENT
VIDEO OUT
Pb
Pr
Y
AUDIO
OUT 2 AUDIO OUT 1
COAXIAL
OPTICAL
L
R
L
R