Aiwa XP-R970 Radio Reception, Tuning into a station, For quick tuning, For better reception + ~

RADIO RECEPTION

Tuning into a station

1Press TUNER ON/BAND repeatedly to select AM or FM.

2Press TUNING + (-) or - (W<) to tune into a station.

After listening, press ■ STOP/OFF/CHARGE to turn off the radio.

For quick tuning

Keep either TUNING + (_l) or – (W) pressed for 1 or 2 seconds. When a station is tuned in to, the frequency stops automatically. However, it does not stop if the broadcast signal is weak.

For better reception + ~

FM: The headphone cord functions as the FM antenna. Keep it extended.

AM: Turn the unit to find the position which gives the best reception.

To listen to an FM stereo broadcasting

Press MONO/ST repeatedly to display STEREO.

When the FM stereo signal is weak and distorted, press

MONO/ST again. STEREO display goes out and the sound will be heard in monaural but distortion will be

reduced.

Note

●Do not open the disc compartment during radio reception. The buttons will be deactivated.

●The power is turned off automatically if no operation is made after 3 hours from the last operation during radio reception.

AM/FM steps + O

●Radio broadcasts have different frequency ranges and changes in different steps in different countries.

This unit is factory-set to 10 kHz steps on AM. When using the unit where the AM step changes 9 kHz, set the AM STEP switch in the battery compartment to 9 kHz.