Aiwa XP-R970 manual Batteries, Using on AC House Current

USING ON THE	mm
RECHARGEABLE	BATTERIES

●Be sure to use size AA Ni-Cd 1.2 V rechargeable batteries, which are commercially available.

●Be sure to read the instructions of the purchased rechargeable batteries before use.

●When using on the rechargeable batteries for the first time, charge them until the battery indicator goes out.

*Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is opened.

1Insert the rechargeable batteries with the ~ and O marks correctly aligned.

2Connect the AC adaptor. (3 to DC 6 V jack

@to a wall outlet

3Press 9STOPIOFt=/CHARGE to start charging. C-On is displayed and the battery indicator@ blinks. Recharge the batteries until the battery indicator goes out. After charging, disconnect the AC adaptor.

Time to recharge the batteries

Recharge the batteries when the E (ied) lights. If the unit remains in use after E (red) lights, Lo batt is displayed and the current operation will stop.

To stop charging

Press ● STOP/OFF/cHARGE during charging.

USING ON AC HOUSE CURRENT

Connect the supplied AC adaptor in the same way as recharging the batteries.

During operation on AC house current, all of the battery indicator lights.