MAINTENANCE

11.Remove the cloth, being careful not to allow any contamination into the spindle. Tighten the nut until a rolling torque of 16-21 inch-pounds is reached. (If the seal was not lubricated, add 10 inch-pounds).

12.Stake the nut with a blunt, round nosed punch. Do not tear the nut.

13.Install the grease fitting into the hole in the center of the housing (between the bearings) and fill the housing with EP#2 grease, stopping when the lubricant covers the upper bearing (approximately 11 oz.).

14.Install the breather plug in the top hole.

15.Install spindle in mower deck and assemble in reverse order. Torque the blade bar or pan bolts to 400 ft-lbs. Torque motor to spindle bolts to 85 ft-lbs. Torque spindle to deck bolts at 175 ft-lbs.

MACHETE 2 11/08

Maintenance Section 4-23

©2008 Alamo Group Inc.

MAINTENANCE

Page 119
Image 119
Alamo 02986941C manual Maintenance

02986941C specifications

The Alamo 02986941C is a state-of-the-art military vehicle that captures attention with its robust design and advanced features. Known for its durability and high performance, this tactical solution is engineered to meet the demands of modern warfare while ensuring the safety of its operators.

One of the primary characteristics of the Alamo 02986941C is its fortified structure, built to withstand ballistic and explosive threats. Constructed from high-strength steel and composite materials, the vehicle can effectively protect against small arms fire and shrapnel, making it a reliable choice for frontline operations. The armor design is strategically layered, enhancing overall resilience and providing additional protection to vulnerable areas.

In terms of mobility, the Alamo 02986941C is powered by a robust engine that delivers exceptional off-road performance. Equipped with a four-wheel drive system and advanced suspension technology, the vehicle can navigate challenging terrains with ease. Its relatively compact size allows for greater maneuverability in urban environments, while still enabling it to traverse rugged landscapes.

The vehicle is also outfitted with a sophisticated electronic systems suite, enhancing situational awareness for its crew. Integrated communication systems allow for real-time coordination with other military units, fostering efficient command and control. Additionally, advanced navigation systems enable precise positioning and route planning, essential for tactical missions.

For versatility, the Alamo 02986941C can be equipped with a range of modular components and weapon systems. This adaptability allows the vehicle to transition between different roles, such as troop transport, reconnaissance, or direct fire support, depending on mission requirements. Various mounting options accommodate machine guns, missile systems, and other armaments, ensuring that the vehicle can be tailored to specific operational needs.

The interior of the Alamo 02986941C is designed with crew comfort and functionality in mind, featuring ergonomic seating, climate control, and ample storage space for equipment. The vehicle's design maximizes the efficiency of personnel operations, enabling quick entry and exit, as well as effective management of supplies and gear.

Overall, the Alamo 02986941C stands out as a multi-functional military vehicle, combining advanced protection, mobility, and technology. Its strategic design and robust performance capabilities make it an invaluable asset in contemporary military operations, showcasing a commitment to innovation in defense systems.