Alamo 02986941C Timber Cat, Ditcher Head

OPERATION

MACHETE 2 11/08 Operation Section 3-40

OPERATION

Timber Cat

• The T imber Cat Sickle Bar Limb Cutter is rated

for material up to 4” in diameter.

• The Timber Cat is operated attached to the

boom arm and is ideal for trimming populated

areas where a sm oo th cut is req uir e d.

• When operating the Timber Cat correctly the

limbs fall straight down for easy disposal and

clean-up.

• When operating the unit be sure there are no

bystande rs or animals with in 100 yards of the

unit.

OPS-B- 0044

• The Ditcher is designed to remove b oth debr is

and dirt from ditches.

• When operating, the Ditcher can reach from up

to 12’, and has a cutting width of 22”.

• When operated in reverse rotation the spoil is

deposited between the tractor and ditcher.

When operated in forward the spoil is

deposited away from the tractor.

NOTE: Creeper Gear Is Recommended!

Operating with out Creeper Gear on tractor (1/4

mph) will not allow ditcher time to cut.

OPS-B- 0045

The rotating parts of this machine have been designed and tested for rugged use.

However, the blades could fail upon impact with heavy, solid objects such as metal guard

rails and concrete structures. Such impact could cause the broken objects to be thrown

outward at very high velocities. To reduce the possibility of property damage, serious

injury, or even death, never allow the cutting blades to contact such obstacles. (SGM-4)

All Safety Shields, Guards and Safety devices including (but not

limited to) - the Deflectors, Chain Guards, Steel Guards, Gearbox

Shields, PTO integral shields, and Retractable Door Shields should

be used and maintained in good working condition. All safety devices should be

inspected carefully at least daily for missing or broken components. Missing, broken,

or worn items must be replaced at once to reduce the possibility of injury or death

from thrown objects, entanglement, or blade contact. (SGM-3)