(SGM-7)

OPERATION

OPERATION

Rotary Mowers are capable under adverse conditions of throwing objects for great distances 100 yards or more) and causing serious injury or death. Follow safety messages carefully.

STOP MOWING IF PASSERSBY ARE WITHIN 100 YARDS UNLESS: Front and Rear Deflectors are installed and in good, working condition;

Mower Head is running close to and parallel to the ground without exposed Blades; Passersby are outside the existing thrown-object zone;

All areas have been thoroughly inspected and all foreign material such as rocks, cans, glass, and general debris has been removed.

NOTE: Where there are grass and weeds high enough to hide debris that could be struck

by the blades, the area should be: inspected and large debris removed, mowed at an intermediate height, inspected closely with any remaining dsebris being removed, and mowed again at desired final height. (SBM-1)

9.2 Operating Speed and Ground Speed

Ground speed for mowing will depend upon the height, type, and density of vegetation to be cut. Do Not exceed 2 MPH while operating. Operate the mower at its full rated PTO speed to maintain blade speed for a clean cut. Refer to the tractor operator’s manual or the tractor instrument panel for the engine speed and gear to provide the required operating and desired ground speed. Make sure that the mower is operating at its full rated speed before entering the vegetation to be cut. Always start and stop cutting blades with engine near idle.

Ground speed is achieved by transmission gear selection and not by the engine operating speed. The operator may be required to experiment with several gear range combinations to determine the best gear and range which provides the most ideal performance from the implement and most efficient tractor operation. As the severity of cutting conditions increase, the ground speed should be decreased by selecting a lower gear to maintain the proper operating PTO speed. OPS-B- 0009

Mow at the speed that you can safely operate and control the tractor and mower. The correct mowing speed depends on terrain condition and grass type, density, and height of cut. Normal ground speed range is from 2 to 5 mph(3-8 kph). Use slow mowing speeds

when operating on or near steep slopes, ditches, drop-offs, overhead obstructions, power lines, or when debris and foreign objects are to be avoided.

MACHETE 2 11/08

Operation Section 3-36

©2008 Alamo Group Inc.

Page 83 Page 85
Page 84
Image 84
Alamo 02986941C manual Operating Speed and Ground Speed
Page 83 Page 85

02986941C specifications

The Alamo 02986941C is a state-of-the-art military vehicle that captures attention with its robust design and advanced features. Known for its durability and high performance, this tactical solution is engineered to meet the demands of modern warfare while ensuring the safety of its operators.

One of the primary characteristics of the Alamo 02986941C is its fortified structure, built to withstand ballistic and explosive threats. Constructed from high-strength steel and composite materials, the vehicle can effectively protect against small arms fire and shrapnel, making it a reliable choice for frontline operations. The armor design is strategically layered, enhancing overall resilience and providing additional protection to vulnerable areas.

In terms of mobility, the Alamo 02986941C is powered by a robust engine that delivers exceptional off-road performance. Equipped with a four-wheel drive system and advanced suspension technology, the vehicle can navigate challenging terrains with ease. Its relatively compact size allows for greater maneuverability in urban environments, while still enabling it to traverse rugged landscapes.

The vehicle is also outfitted with a sophisticated electronic systems suite, enhancing situational awareness for its crew. Integrated communication systems allow for real-time coordination with other military units, fostering efficient command and control. Additionally, advanced navigation systems enable precise positioning and route planning, essential for tactical missions.

For versatility, the Alamo 02986941C can be equipped with a range of modular components and weapon systems. This adaptability allows the vehicle to transition between different roles, such as troop transport, reconnaissance, or direct fire support, depending on mission requirements. Various mounting options accommodate machine guns, missile systems, and other armaments, ensuring that the vehicle can be tailored to specific operational needs.

The interior of the Alamo 02986941C is designed with crew comfort and functionality in mind, featuring ergonomic seating, climate control, and ample storage space for equipment. The vehicle's design maximizes the efficiency of personnel operations, enabling quick entry and exit, as well as effective management of supplies and gear.

Overall, the Alamo 02986941C stands out as a multi-functional military vehicle, combining advanced protection, mobility, and technology. Its strategic design and robust performance capabilities make it an invaluable asset in contemporary military operations, showcasing a commitment to innovation in defense systems.
Top Page Image Contents