OPERATION

Transport only at speeds where you can maintain control of the equipment. Serious accidents and injuries can result from operating this equipment at high speeds. Understand the Tractor and Implement and

how it handles before transporting on streets and highways. Make sure the Tractor steering and brakes are in good condition and operate properly.

Before transporting the Tractor and Implement, determine the proper transport speeds for you and the equipment. Make sure you abide by the following rules:

Test the tractor at a slow speed and increase the speed slowly. Apply the Brakes smoothly to determine the stopping characteristics of the Tractor and Implement. As you increase the speed of the Tractor the stopping distance increases. Determine the maximum transport speed not to exceed 20 mph (30 kph) for transporting this equipment.

Test the equipment at a slow speed in turns. Increase the speed through the turn only after you determine that the equipment can be operated at a higher speed. Use extreme care and reduce your speed when turning sharply to prevent the tractor and implement from turning over. Determine the maximum turning speed for you and this equipment before operating on roads or uneven ground.

Only transport the Tractor and Implement at the speeds which allow you to properly control the equipment.

Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes or worn tires. When operating down a hill or on wet or rain slick roads, the braking distance increases: use extreme care and reduce your speed. When operating in traffic always use the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you and watch out for the other guy. (SG-19)

8.1 Starting the Tractor

The procedure to start the tractor is model specific. Refer to the tractor operator’s manual for starting procedures for your particular tractor. Consult an authorized dealer if the starting procedure is unclear. Ensure the 3-point control lever is in the lowered position and the PTO is disengaged before starting the tractor. OPS-U-0033

MACHETE 2 11/08

Operation Section 3-31

©2008 Alamo Group Inc.

OPERATION

Page 78 Page 80
Page 79
Image 79
Alamo 02986941C manual Starting the Tractor
Page 78 Page 80

02986941C specifications

The Alamo 02986941C is a state-of-the-art military vehicle that captures attention with its robust design and advanced features. Known for its durability and high performance, this tactical solution is engineered to meet the demands of modern warfare while ensuring the safety of its operators.

One of the primary characteristics of the Alamo 02986941C is its fortified structure, built to withstand ballistic and explosive threats. Constructed from high-strength steel and composite materials, the vehicle can effectively protect against small arms fire and shrapnel, making it a reliable choice for frontline operations. The armor design is strategically layered, enhancing overall resilience and providing additional protection to vulnerable areas.

In terms of mobility, the Alamo 02986941C is powered by a robust engine that delivers exceptional off-road performance. Equipped with a four-wheel drive system and advanced suspension technology, the vehicle can navigate challenging terrains with ease. Its relatively compact size allows for greater maneuverability in urban environments, while still enabling it to traverse rugged landscapes.

The vehicle is also outfitted with a sophisticated electronic systems suite, enhancing situational awareness for its crew. Integrated communication systems allow for real-time coordination with other military units, fostering efficient command and control. Additionally, advanced navigation systems enable precise positioning and route planning, essential for tactical missions.

For versatility, the Alamo 02986941C can be equipped with a range of modular components and weapon systems. This adaptability allows the vehicle to transition between different roles, such as troop transport, reconnaissance, or direct fire support, depending on mission requirements. Various mounting options accommodate machine guns, missile systems, and other armaments, ensuring that the vehicle can be tailored to specific operational needs.

The interior of the Alamo 02986941C is designed with crew comfort and functionality in mind, featuring ergonomic seating, climate control, and ample storage space for equipment. The vehicle's design maximizes the efficiency of personnel operations, enabling quick entry and exit, as well as effective management of supplies and gear.

Overall, the Alamo 02986941C stands out as a multi-functional military vehicle, combining advanced protection, mobility, and technology. Its strategic design and robust performance capabilities make it an invaluable asset in contemporary military operations, showcasing a commitment to innovation in defense systems.
Top Page Image Contents