MAINTENANCE

Before installing the spindle (with the bearing pressed on it), lubricate the rubber portion of the seal. This will reduce the chance of the Seal being torn by the installation of the spindle and is a necessary step when setting the rolling Torque.

Turn the Spindle Housing Upside Down and insert the spindle (with the bearing pressed onto it) into the spindle housing until the bearing cone contacts the cup in the Housing. During this step take care not to damage the seal.

While supporting the Spindle and Housing turn the assembly over so that the assembly is setting on the spindle.

Install the upper bearing (4) on the spindle shaft (1).

After the Upper Bearing is installed, install the nut (5) with the chamfer facing up. Run the nut down against the bearing, but do not torque the nut at this time. Clamp the spindle Housing in a vise so that the spindle shaft can rotate. Tighten the nut until the spindle shaft has a rolling torque of 25 in-lbs (that is it takes 25 in-lbs to rotate the spindle shaft).

Install the tanged lockwasher (6) with the outside prongs facing upward.

Install the top nut (5) with the chamfer facing down. Block the spindle to keep it from rotating and torque the top nut to a minimum of 100 ft-lbs. Bend the tang of the lockwasher to fit into one of the grooves of the top nut.

Install vent plug (8) and Grease Fitting (9).

Fill spindle assembly with NLGI EP#2 Grease (Approx 22 oz.).

MACHETE 2 11/08

Maintenance Section 4-9

©2008 Alamo Group Inc.

MAINTENANCE

Page 105
Image 105
Alamo 02986941C manual Maintenance

02986941C specifications

The Alamo 02986941C is a state-of-the-art military vehicle that captures attention with its robust design and advanced features. Known for its durability and high performance, this tactical solution is engineered to meet the demands of modern warfare while ensuring the safety of its operators.

One of the primary characteristics of the Alamo 02986941C is its fortified structure, built to withstand ballistic and explosive threats. Constructed from high-strength steel and composite materials, the vehicle can effectively protect against small arms fire and shrapnel, making it a reliable choice for frontline operations. The armor design is strategically layered, enhancing overall resilience and providing additional protection to vulnerable areas.

In terms of mobility, the Alamo 02986941C is powered by a robust engine that delivers exceptional off-road performance. Equipped with a four-wheel drive system and advanced suspension technology, the vehicle can navigate challenging terrains with ease. Its relatively compact size allows for greater maneuverability in urban environments, while still enabling it to traverse rugged landscapes.

The vehicle is also outfitted with a sophisticated electronic systems suite, enhancing situational awareness for its crew. Integrated communication systems allow for real-time coordination with other military units, fostering efficient command and control. Additionally, advanced navigation systems enable precise positioning and route planning, essential for tactical missions.

For versatility, the Alamo 02986941C can be equipped with a range of modular components and weapon systems. This adaptability allows the vehicle to transition between different roles, such as troop transport, reconnaissance, or direct fire support, depending on mission requirements. Various mounting options accommodate machine guns, missile systems, and other armaments, ensuring that the vehicle can be tailored to specific operational needs.

The interior of the Alamo 02986941C is designed with crew comfort and functionality in mind, featuring ergonomic seating, climate control, and ample storage space for equipment. The vehicle's design maximizes the efficiency of personnel operations, enabling quick entry and exit, as well as effective management of supplies and gear.

Overall, the Alamo 02986941C stands out as a multi-functional military vehicle, combining advanced protection, mobility, and technology. Its strategic design and robust performance capabilities make it an invaluable asset in contemporary military operations, showcasing a commitment to innovation in defense systems.