(SG-12)

OPERATION

OPERATION

2.4 Tractor Ballast

To ensure tractor stability when operating on flat surfaces the left rear tractor tire MUST exert a minimum down force (weight) of 1500 lbs. on the ground when the tractor is on level ground, its boom is fully extended and the mower head is horizontal and two feet above the ground. For units which have the ability to operate on either side of the tractor, these requirements must also be met for the right side tire when the boom is extended to the left side as described above. A tractor that does not meet this criteria is DANGEROUS and should not be operated as upset of the unit can occur resulting in possible serious injury and property damage. NOTE: All factory mounted units are tested and meet the ballast requirement before shipment; further testing is not required unless the unit is operated in a manner other than what is considered standard operating conditions.

For additional information on properly ballasting the tractor, refer to Alamo Industrial Tractor and Mower Stability Pamphlet P/N #02959010

If the unit is operated on slopes greater than 5°, additional counterweight will be required. Operation of the unit on slopes greater than 11 percent (6.4 degrees) is not recommended under any circumstances. On a tractor with a 96” outside to outside tire spread, an 11 percent (6.4 degrees) slope occurs when one rear tractor tire is about 8” lower than the other rear tire. OPS-B- 0018

3.GETTING ON AND OFF THE TRACTOR

Before getting onto the tractor, the operator must read and completely understand the implement and tractor operator manuals. If any part of either manual is not completely understood, consult an authorized dealer for a complete explanation. OPS-U- 0007

Do not mount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped.

MACHETE 2 11/08

Operation Section 3-6

©2008 Alamo Group Inc.

Page 54
Image 54
Alamo 02986941C manual Getting on and OFF the Tractor, Tractor Ballast

02986941C specifications

The Alamo 02986941C is a state-of-the-art military vehicle that captures attention with its robust design and advanced features. Known for its durability and high performance, this tactical solution is engineered to meet the demands of modern warfare while ensuring the safety of its operators.

One of the primary characteristics of the Alamo 02986941C is its fortified structure, built to withstand ballistic and explosive threats. Constructed from high-strength steel and composite materials, the vehicle can effectively protect against small arms fire and shrapnel, making it a reliable choice for frontline operations. The armor design is strategically layered, enhancing overall resilience and providing additional protection to vulnerable areas.

In terms of mobility, the Alamo 02986941C is powered by a robust engine that delivers exceptional off-road performance. Equipped with a four-wheel drive system and advanced suspension technology, the vehicle can navigate challenging terrains with ease. Its relatively compact size allows for greater maneuverability in urban environments, while still enabling it to traverse rugged landscapes.

The vehicle is also outfitted with a sophisticated electronic systems suite, enhancing situational awareness for its crew. Integrated communication systems allow for real-time coordination with other military units, fostering efficient command and control. Additionally, advanced navigation systems enable precise positioning and route planning, essential for tactical missions.

For versatility, the Alamo 02986941C can be equipped with a range of modular components and weapon systems. This adaptability allows the vehicle to transition between different roles, such as troop transport, reconnaissance, or direct fire support, depending on mission requirements. Various mounting options accommodate machine guns, missile systems, and other armaments, ensuring that the vehicle can be tailored to specific operational needs.

The interior of the Alamo 02986941C is designed with crew comfort and functionality in mind, featuring ergonomic seating, climate control, and ample storage space for equipment. The vehicle's design maximizes the efficiency of personnel operations, enabling quick entry and exit, as well as effective management of supplies and gear.

Overall, the Alamo 02986941C stands out as a multi-functional military vehicle, combining advanced protection, mobility, and technology. Its strategic design and robust performance capabilities make it an invaluable asset in contemporary military operations, showcasing a commitment to innovation in defense systems.