Alamo 02986941C 8, ., IMPLEMENT, AND, TRACTOR, THE, DRIVING,

OPERATION
MACHETE 2 11/08 Operation Section 3-30
©2008 Alamo Group Inc.
OPERATION
8
.
DRIVING
THE
TRACTOR
AND
IMPLEMENT
Safe tractor transport requires the operator to possess a thorough knowledge of the model being operated
and precautions to take while driving with an attached implement. Ensure the tractor has the capacity to
handle the weight of the boom and the tractor operating controls are set for safe transport. To ensure safety
while driving the tractor with a boom, review the following.
Read all safety instructions. Decals on the Boom warn you of particular and multiple hazards. Some decals
are attached close to part of the Boom where there is a possible hazard. Read and make sure you
understand the safety messages before you operate the implement. Keep all decals clean and readable.
Replace lost or dama ge d de ca ls, re fe r to safety sec tion fo r more information.
Power for operating the mower is supplied from the tractor PTO. Refer to your tractor manual instructions for
engaging and disengaging the PTO. Start the tractor and bring the engine speed up to normal operating
speed of 540 PTO RPM. Always engage the PTO at low engine RPM and run the mower for a short period
until all air is removed from the hoses. Keep all person's well clear of mower since blades can throw objects
with great velocity for a considerable distance! KEEP CLEAR! OPS-B- 0005
N
ever opera
t
e
th
e
T
rac
t
or or
I
mp
l
emen
t
un
til
you
h
ave rea
d
an
d
completely understand this Manual, the Tractor Operator ’s Manual, and
each of the Safety Messages found in the Manual or on the Tractor and
Implement. Learn how to stop the tractor engine suddenly in an
emergency. Never allow inexperienced or untrained personnel to
operate the Tractor and Implement without supervision. Make sure the
operator has fully read and understood the manuals prior to operation.
(SG-4)
Always maint ain the safety signs in good r eadable conditio n. If the safety signs are missing,
damaged, or unreadable, obtain and install replacement safety signs immediately. (SG- 5)
BEFORE leaving the tractor seat, always engage the brake and/or set
the tractor transmission in parking gear, disengage the PTO, stop the
engine, remove the key, and wait for all moving parts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
from rolling. Never dismount a Tractor that is moving or while the engine
is running. Operate the Tractor controls from the tractor seat only. (SG-9)