MAINTENANCE

TANK FILL

Check the sight gauge and add hydraulic fluid (Refer to list of recommended fluids) to bring the level up between 1/2 to 3/4 on the gauge. See Figure MntP-0017.

MAINTENANCE

BLADES

Check the Blades for cracks and wear and Blade Bolts for tightness, daily. Blades should be replaced when they are worn excessively, bent, deformed, or out of balance.

Blades should always be replaced in pairs. Blades of different weights can cause serious imbalance and damage to the machine and personnel. When replacing blades, take care to replace the blade bolts, nuts, and washers.

SAMURAI 12/08

Maintenance Section 4-4

©2008 Alamo Group Inc.

Page 100
Image 100
Alamo FC-0002 manual Blades, Tank Fill