Alamo SHD88, SHD96, SHD74, SHD62 manual Driveline Attachment, Rubber Deflector Attachment

ASSEMBLY

DRIVELINE ATTACHMENT

Before starting assembly, make certain that all paint, dirt, and grease are removed from gearbox shaft (1). To ease assembly apply a light coat of grease to splines and assemble. Do not assemble a drive line without a shield.

Attach the slip clutch end of the driveline to the gearbox input shaft securely. Make certain that the slip clutch is fully onto the input shaft splines. Tighten the locknuts (2) alternately until they have reached the proper torque. See Image ASMP-FL- 0017.

Refer to Torque Chart in the Maintenance Section

RUBBER DEFLECTOR ATTACHMENT

Attach rubber deflector to mower using 1/4” x 7/8” bolts, washers, and locknuts with bolthead located on the underside of deflector as shown in Image ASMP-FL-0018.

SHD 03/09 Assembly Section 3-5

© 2009 Alamo Group Inc.

ASSEMBLY