OPERATION
OPERATION
| SHD 88 | SHD 96 |
Horsepower Required (Min.) | 40HP | 50HP |
Tractor PTO | 540 RPM | 540 RPM |
Cutting Capacity | 1” | 1” |
Cutting Height | 1/2 - 6” | 1/2 - 6” |
Cutting Width | 88” | 96” |
Overall Width | 96” | 103” |
Overall Length | 40” | 40” |
Weight (Approximate) | 1035 lbs | 1170 lbs |
Hitch | CAT | CAT |
Blades | Fine or Coarse Cut | Fine or Coarse Cut |
Number of Knives | Fine Cut 108 pair | Fine Cut 118 pair |
| Coarse Cut 44 pair | Coarse Cut 48 pair |
Blade Rotation | Forward | Forward |
Cuttershaft Diameter | ||
Gearbox Rating | 60HP | 60HP |
Knife Tip Speed (FPM) | 8900 | 8900 |
Driveline Size | CAT 4 | CAT 4 |
Driveline Protection | Slip Clutch | Slip Clutch |
Drive Belt | “C” Size | “C” Size |
Deck Thickness | 10 Ga. | 10 Ga. |
Rear Roller Diameter | 6” | 6” |
Skid Shoe | STD | STD |
The Mower is designed for certain mowing applications and is rated to cut up to a specific size vegetation (see Mower Standard Equipment and Specifications). DO NOT use this mower to cut vegetation above the Mower’s rated capacity or to cut any type of non- vegetative material. Only operate this Mower on a properly sized and equipped Tractor. Operating this Mower in an application for which it is not designed and/or operating the Mower with the wrong size Tractor can cause Mower component damage and equipment failure resulting in possible serious injury or death.
SHD 03/09 | Operation Section |
© 2009 Alamo Group Inc.