Receiving a call, During a call, Conference calls

3.3Receiving a call

When you receive an incoming call, press the send key to talk and then

hang up using the key.

If the icon is displayed, the vibrator is activated and there is no ringtone. If the icon is displayed, the phone neither rings nor vibrates.

The caller’s number is displayed if it is transmitted by the network (contact your network operator to check service availability).

Muting the ringtone

To mute ringtone of current incoming call, press Right softkey once.

Rejecting a call

Press the key once, or reject it by SMS (Options\Reject call with SMS).

3.4During a call (1)

During a call, following options are available:

•Mute (Turn the Mute function on/off during a call)

•Hold (Hold the current call)

•End single call (End the current call)

•New call (Hold the current call and dial another number)

•Contacts (Enter Contacts)

•Call Log (Enter Call Log) call log

•Messages (Enter Message)

•Sound recorder (record your current call)

•DTMF (Enable/Disable sending DTMF during the call)

•Switch audio path (Switch current audio path)

(1)Contact your network operator to check service availability.

You can use H-freefunction by pressing Navigation key during a call.

You may also adjust sound level by using Volume key directly during a call.

Move the handset away from your ear while using the "H-free"

option because the amplified volume might cause hearing damage.

You can switch the audio speech from handset to Bluetooth device when connected.

Handling two calls

•Answering a second call (ensure that "Call waiting" is activated, see page 42).

•To call a second party during a call, you can select "Options\New call".

3.5Conference calls (1)

Your phone allows you to talk to several people at the same time (up to five). If you are on a double call, press "Options" and select "Conference". If a third call comes in, answer it by pressing the send key and speak with your new caller.

This caller becomes a member of the conference if you press "Options"

and select "Conference call". Pressing disconnects the current call.