Alcatel-Lucent 6300-24 manual Optional Backup Power Supply, Power Supply Receptacles

Features and Benefits 1

Optional Backup Power Supply

The switch supports an optional Backup Power Supply (BPS), that can supply power to the switch in the event of failure of the internal power supply.

Power Supply Receptacles

There are two power receptacles on the rear panel of the switch. The standard power receptacle is for the AC power cord. The receptacle labeled “BPS” is for the optional Backup Power Supply.

100-240V~, 50-60Hz 2A

BPS

DC IN 12V 8.5A

Figure 1-4. Power Supply Receptacle

Features and Benefits

Connectivity

•24 dual-speed ports for easy Gigabit Ethernet integration and for protection of your investment in legacy LAN equipment.

•Auto-negotiation enables each RJ-45 port to automatically select the optimum communication mode (half or full duplex) if this feature is supported by the attached device; otherwise the port can be configured manually.

•Independent RJ-45 10/100/1000BASE-T ports with auto MDI/MDI-X pinout selection.

•Unshielded (UTP) cable supported on all RJ-45 ports: Category 3, 4 or 5 for

10 Mbps connections, Category 5 or 5e for 100 Mbps connections, and Category 5 or better for 1000 Mbps connections.

•IEEE 802.3 Ethernet, 802.3u Fast Ethernet, 802.3z and 802.3ab Gigabit Ethernet compliance ensures compatibility with standards-based hubs, network cards and switches from any vendor.

Expandability

• Supports 1000BASE-SX and 1000BASE-LX SFP transceivers.

Performance

•Transparent bridging

•Switching table with a total of 16K MAC address entries

•Provides store-and-forward switching

•Supports wire-speed switching

•Supports flow control, using back pressure for half duplex and IEEE 802.3x for full duplex

•Broadcast storm control

•Desktop or rack-mountable

1-5