Alcatel-Lucent 6300-24 manual Rack Mounting

Mounting 3

Mounting

A switch unit can be mounted in a standard 19-inch equipment rack or on a desktop or shelf. Mounting instructions for each type of site follow.

Rack Mounting

Before rack mounting the switch, pay particular attention to the following factors:

•Temperature: Since the temperature within a rack assembly may be higher than the ambient room temperature, check that the rack-environment temperature is within the specified operating temperature range. (See page C-1.)

•Mechanical Loading: Do not place any equipment on top of a rack-mounted unit.

•Circuit Overloading: Be sure that the supply circuit to the rack assembly is not overloaded.

•Grounding: Rack-mounted equipment should be properly grounded. Particular attention should be given to supply connections other than direct connections to the mains.

To rack-mount devices:

1.Attach the brackets to the device using the screws provided in the Bracket Mounting Kit.

1 3

2 4

5

6

	1000=Green
7	9
		11
8	10
		12

10/100=Y
	ellow
13	15
		17
			19
				21
14	16
		18
			20
				22

23

24

Link/

Act

FDX

Link/

Act

FDX

Power

Diag

BPS

OmniStac 6300-24k

Console

Figure 3-2. Attaching the Brackets

3-3